Mr. Sticky's Underwater Glue 57g Auto-Mix * Refill Cartridge*

(1 review) Write a Review
0.40 LBS



**Auto-mix dispensing system refill cartridge**



Fix it once. The ULTIMATE BOND IN WET OR DRY CONDITIONS! Mr. Sticky's Underwater Glue combines the bonding power of epoxy with the the resiliency of rubber to achieve a heavy duty bond. This means that Mr. Sticky's Underwater Glue resists vibration, shock and bending, so it stretches with the materials that it is glued to. 


Non - Drip: Mr. Sticky's Underwater Glue is perfect for repairs on vertical surfaces!

Rubberized: Mr. Sticky's Underwater Glue resists shrinkage, expansion, bending, vibration, shock and fatigue!

Aquarium Safe: Our Underwater Glue is safe for use with fish*! Please visit our FAQ for more information.

Paintable and Sandable: You can sand and paint Mr. Sticky's to match the contours of your project and paint to match colors for a seamless repair!

Apply in wet or dry conditions: In or around water, on your patio, or in your house, Mr. Sticky's Underwater Glue will bond most of any material in any conditions!

Salt Water Capable: Mr. Sticky's Underwater Glue is strong enough to withstand harsh salt water environments!


Use Mr. Sticky's Underwater Glue for hundreds of applications including but not limited to:

  • Fixing Pool Covers
  • Spa Filter Repair
  • Fish Ponds
  • Rafts
  • Plumbing Leaks
  • Patio Umbrellas
  • Pool Liner Leaks
  • Inflatable Boats
  • Pump Housings
  • Pin Hole Leaks
  • Spa Shells
  • Patio Furniture
  • Pool Toys
  • Spa Jet Cracks
  • Aquariums
  • Skimmer Cracks
  • Coral
  • and much, much more!

This 57 gram auto mix dispenser will dispense a bead of 12' of 3/16" through a static mixing tip. The 57 gram kit comes with one mixing nozzle and is best used if you mount the dual cartridge in either a dispensing gun or caulking gun adapter as it will squeeze out perfectly mixed adhesives.

Extra mixing tubes are available if you do not plan on using the entire 57g at one time.


*Dispensing Gun or Caulking Gun Adapter required*


Also availiable 30 gram manual dual syringe system that dispenses an equal amount of the product that then can be mixed for use.


COLOR WHITE: Working time is 15-30 minutes, handling time 1-2 hours and cure time 24 hours. Can be applied above or below water.


All of Mr. Sticky's Premium Adhesives are manufactured in the U.S.A. using the highest quality ISO Standards!

View AllClose

1 Review

  • 5
    First time user

    Posted by Suzy on 22nd Sep 2015

    So, just purchased the glue. We had a seam in our underground pool that split about 3/4 of the way across.We decided to drain the pool past the rip. We then applied Mr. Sticky glue. Everything went well. Product was easy to apply,and seemed to adhere very well.We then refilled the pool.We marked the water level, and so far its been a week and no leaking. Now comes the test. We are closing the pool hoping to make it through the winter with no leaking. Then we will install a new liner in the spring.If this holds through the winter I will get back on this web site and re-review this product. Wish us luck!!!!

View AllClose