Mr. Sticky's Poly-Bonder Glue 30g

(8 reviews) Write a Review
SKU:
689602003307
UPC:
689602003307
Availability:
Ships the same or next business day
Weight:
0.25 LBS
Shipping:
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 3 - 100 and pay only $15.29 each
$17.99

Description

MR. STICKY'S POLY-BONDER

 

BOND PLASTICS AND EVEN HDPE IN WET OR DRY CONDITIONS!

 

Fix it once. The ULTIMATE BOND IN WET OR DRY CONDITIONS! Mr. Sticky's POLY-BONDER combines the bonding power of epoxy with the the resiliency of rubber to achieve a heavy duty bond. This means that Mr. Sticky's POLY-BONDER resists vibration, shock and bending, so it stretches with the materials that it is glued to, even High Density Polyethylene (HDPE). 

 

Non - Drip: Mr. Sticky's Poly-Bonder is perfect for repairs on vertical surfaces!

Rubberized: Mr. Sticky's Poly-Bonder resists shrinkage, expansion, bending, vibration, shock and fatigue!

Bond Hard to Glue Plastics: Our Poly-Bonder is the only glue that will bond to HDPE.

Paintable and Sandable: You can sand and paint Mr. Sticky's to match the contours of your project and paint to match colors for a seamless repair!

Apply in wet or dry conditions: In or around water, on your patio, or in your house, Mr. Sticky's Poly-Bonder will bond most of any material in any conditions!

 

Use Mr. Sticky's Poly-Bonder for hundreds of applications including but not limited to:

  • Poly Tanks
  • Irrigation Line Holes
  • Bait Tanks
  • Skids
  • Boat Pontoons
  • Hypalon Boats
  • Fiberglass Boats
  • Poly/Plastic Kayaks
  • Acrylics
  • UHMW
  • Vinyl
  • Styrofoam
  • Lexan
  • PVC
  • LDPE
  • Polypropylene
  • Polyurethane
  • and much, much more!

It is also available in a 57 gram auto mix dispensing system that will dispense a bead of 12' of 3/16" through a static mixing tip. The 57 gram kit comes with one mixing nozzle and is best used if you mount the dual cartridge in either a dispensing gun or caulking gun adapter as it will squeeze out perfectly mixed adhesives. If you order the 57g system you will need to order separately either a caulking gun adapter or dispensing gun. Extra mixing tubes are available if you do not plan on using the entire 57g at one time.

 

COLOR WHITE: Working time is 15-30 minutes, handling time 1-2 hours and cure time 24 hours. Can be applied above or below water.

 

All of Mr. Sticky's Premium Adhesives are manufactured in the U.S.A. using the highest quality ISO Standards!

View AllClose

Videos Hide Videos Show Videos

8 Reviews

  • 1
    Poly Bonder

    Posted by Scott Thomas on 4th May 2020

    I used it on HDPE. First scuffed with sandpaper, then cleaned with acetone. It did NOT hold.

  • 5
    HDPE/HDPE

    Posted by Linn Derickson on 27th Apr 2020

    PolyBonder can be used to make the the ultrasonic welds even stronger. The ultrasonic welder creates the heat necessary to fully activate the PolyBonder, as well as destroy the surface protection of the HDPE (a poor man's teflon) surfaces.

  • 5
    Poly-Bonder

    Posted by Richard Lee on 26th Apr 2020

    EASY to work with and fixed by leaky poly water tank.

  • 5
    Mr. Sticky's Poly-Bonder Glue

    Posted by Graham Lowry on 9th Mar 2020

    It worked as advertised, as long as the user follows the instructions. it even works to seal cracks just on it's own, no patch needed, just a thick layer of the glue is enough to seal a crack in an HDPE water holding tank.

  • 5
    In a world of Plastics...

    Posted by Curtis on 2nd Mar 2020

    I've really grown to appreciate this glue... I found this glue online, looking for a solution to a plastic glue and have loved it ever since!

  • 5
    PolyBonder

    Posted by Glen on 1st Jan 2020

    My car window came unstuck from plastic clips which push the glass up or down. The clips are oversized for the thickness of glass inserted into them. I've never across adhesive that would hold glass to plastic and fill a void, but Mr. Sticky's did the job! It's a truly remarkable product!

  • 5
    Expensive but works great

    Posted by Unknown on 26th Jun 2018

    I bore out pvc glue connectors and use Mr. Sticky Poly Bonder to glue the pvc to polyethlene tubing as a yard sprinkler repair. Works well even though I do not use the heat treatment on the polyethlene.
    The connector bore closely matches the od of the poly in the repairs that I have done.

  • 5
    Real Sticky

    Posted by Bert on 5th Jan 2015

    I use the poly bonder to mount the starboard panel (HPDE) to the transom for mounting my transducer. This product is awesome!

View AllClose