Mr. Sticky's Poly-Bonder 57g Auto-Mix * Refill Cartridge*

MR. STICKY'S POLY-BONDER

**Auto-mix dispensing system refill cartridge**

BOND PLASTICS AND EVEN HDPE IN WET OR DRY CONDITIONS!

Fix it once. The ULTIMATE BOND IN WET OR DRY CONDITIONS! Mr. Sticky's POLY-BONDER combines the bonding power of epoxy with the the resiliency of rubber to achieve a heavy duty bond. This means that Mr. Sticky's POLY-BONDER resists vibration, shock and bending, so it stretches with the materials that it is glued to, even High Density Polyethylene (HDPE). 

Non - Drip: Mr. Sticky's Poly-Bonder is perfect for repairs on vertical surfaces!

Rubberized: Mr. Sticky's Poly-Bonder resists shrinkage, expansion, bending, vibration, shock and fatigue!

Bond Hard to Glue Plastics: Our Poly-Bonder is the only glue that will bond to HDPE.

Paintable and Sandable: You can sand and paint Mr. Sticky's to match the contours of your project and paint to match colors for a seamless repair!

Apply in wet or dry conditions: In or around water, on your patio, or in your house, Mr. Sticky's Poly-Bonder will bond most of any material in any conditions!

Use Mr. Sticky's Poly-Bonder for hundreds of applications including but not limited to:

This 57 gram auto mix dispenser will dispense a bead of 12' of 3/16" through a static mixing tip. The 57 gram kit comes with one mixing nozzle and is best used if you mount the dual cartridge in either a dispensing gun or caulking gun adapter as it will squeeze out perfectly mixed adhesives.

Extra mixing tubes are available if you do not plan on using the entire 57g at one time.

*Dispensing Gun or Caulking Gun Adapter required*

COLOR WHITE: Working time is 15-30 minutes, handling time 1-2 hours and cure time 24 hours. Can be applied above or below water.

All of Mr. Sticky's Premium Adhesives are manufactured in the U.S.A. using the highest quality ISO Standards!