Poly-Bonder Properties

Technical Bulletin Date Issued: 04/01/04 iPropBulPolyBonder

Mr. Sticky’s® Poly-Bonder® Patent Pending

Description

Mr. Sticky’s® PolyBonder® is a flexible, toughened, non-corrosive, structural adhesive specially designed for various applications and substrates, including bonding of Polyethylene*, Polyproplyene*, ABS, PVC, ceramics and cement. It has been formulated for superior exterior performance, gap filling, impact and fatigue resistance. It’s toughness, imparted by flexibility, causes the energy required to break a bond to be significantly higher than brittle epoxies. Lap Shear Psi, plus high break-energy Psi afford bonds strength/resiliency. *Bond results to Polyethylene and Polypropylene after executing AAI’s flame-treating instructions.

Typical Properties

Mixed Color White

Thixotrophy Non-sagging gel

Elongation (%) 100+

% Solids (by Volume) 100

Viscosity (@ R.T., cps) (Resin 245,000) (Hardener178,000) cps

Density (gr./cc)

Resin 1.25

Hardener 0.99

Mixing Ratio

(PBW) 1.27:1

(PBV) 1:1

Working Time (7 gr. Min) 15-30

Cure Cycle (at 23°C)

Handling Time 1-2 hours

Functional Cure 24 hours

Full Cure 7 days

Tensile Strength (Psi) 1,150+

Lap Shear (Psi)

ABS 800+

Aluminum 1,000+

Ceramic (compressive shear) 1,500+

Cold Rolled Steel 1,500+

Concrete (compressive shear) 2,000+

Copper 1,000+

Fiberglass gel coat 1,000+

Low Density Polyethylene (PE) 500+

High Density Polyethylene (HDPE) 2,000+

Polypropylene 1,500+

PVC 1,400+

Flexural Modulus (Psi) 8,000+